Sts-63 1p 3p Miniature Circuit Breaker
STS-63 series high breaking capacity mini circuit breaker is used in AC50/60Hz, rated current to 63A for overload and short-circuit protection as well as for unfrequented switching under normal case.It is used extensively for industry, commercial and household.This product conform to IEC60898 standard.
General
1. Application:For protecting cables and equipments against overload and short circuit.
2. General rules for choosing MCB.
- Technical data of the network at the point considered
The earthing systems,short-circuit current at the circuit breaker installation point,which must always be less than the breaking capacity of this device,network normal voltage.
- There are 3 curvve characteristics for magnetic operation:
B curve (3-5In) protection and control of the circuits against length cables in TN and IT systems.
C curve (5-10In) protection and control of the circuits against overloads and short-circuits; protection for resistive and inductive loads with low inrush current.
D curve (10-14In) protection and control of the circuits against overloads and short-circuits; protection for circuits which supply loads with high inrush current at the circuit closing (LV/LV transformers,breakdown lamps.)
Specifications
| Model |
STS-63 MCB |
| Standard |
IEC60898 |
| Pole |
1P,2P,3P,4P |
| Rated Short-circuit capacity(Icn) |
3KA,4.5KA,6KA |
| Rated Current(In) |
1,2,4,6,10,16,20,25,32,40,50,63A |
| Rated Voltage(Un) |
AC230(240)/400(415)V |
| Rated Frequency |
50/60HZ |
| Tripping curve |
B,C,D |
| Magnetic releases |
B curve: between 3and 5 In |
| C curve: between 5and 10In |
| D curve: between 10 and 14In |
| Electro-mechanical endurance |
over 6000 cycles |
| |
Standard |
|
IEC/EN 60898-1 |
Electrical
features |
Rated current In |
A |
1,2,4,6,10,16,20,25,32,40,50,63 |
| Poles |
P |
1,2,3,4 |
| Rated voltage Ue |
V |
AC 240/415 |
| Insulation voltage Ui |
V |
500 |
| Rated frequency |
Hz |
50/60 |
| Rated breaking capacity |
A |
45,006,000 |
| Rated impulse withstand voltage(1.2/50)Uimp |
V |
4000 |
| Dielectric test voltage at ind.Freq.for 1 min |
Kv |
2 |
| Pollution degree |
|
2 |
| Thermo-magnetic release characteristic |
|
B,C,D |
Mechanical
features |
Electrical life |
t |
4000 |
| Mechanical life |
t |
10000 |
| Protection degree |
|
IP20 |
Reference temperature for setting
of thermal element |
℃ |
30 |
Ambient temperature
(with daily average ≤35℃) |
℃ |
-5~+40(Special application please refer to
temperature compensation correction) |
| Storage temperature |
℃ |
-25~+70 |
| Installation |
Terminal connection type |
|
Cable/Pin-type busbar |
| Terminal size top/bottom for cable |
mm2 |
25 |
| AWG |
18-3 |
| Therminal size top/bottom for busbar |
mm2 |
25 |
| AWG |
18-3 |
| Tightening torque |
N*m |
2 |
| In-lbs |
18 |
| Mounting |
|
on DDIN rail EN 60715(35mm)by means of fast clip device |
| Connection |
|
From top and bottom |
Product Tags:
|
|
IEC60898 Standard MCB Circuit Breaker Sts-63 1p 3p 4.5KA Images
|
